Coolabah Sesame Outdoor Cantilever Umbrella
Featuring solution-dyed Spuncryclic outdoor performance fabric for high performance under the Australian sun | |
Robust welds provide structural strength to the aluminium frame | |
Adjustable Canopy allows for customizable shading and positioning depending on the angle of the sun. | |
360-Degree Rotation provides flexibility in shading multiple areas without the need to move the entire base. | |
Features Double Roof that allows wind to flow through, reducing pressure and enhancing stability. | |
Includes LED Lights, Solar Panel, Battery Box and USB charger | |
Includes base on wheels to facilitate easy mobility and positioning, allowing for convenient relocation as needed. Base can weigh upto 100kgs when filled with water. | |
Area covered when open: 300cm x 300cm | |
Includes a 12 month guarantee |
Width | Depth | Height | |
---|---|---|---|
1 x Coolabah Sesame Outdoor Cantilever Umbrella With Lights | 300cm | 300cm | 220/290cm |
Umbrella Fabric
Why Umbrella Fabric? Umbrella Fabric is Water resistant, Easy to clean
This product may possess physical and technical attributes that form part of the natural characteristics of this material. Such features may include, but are not limited to: Colour variation, Texture variation, Fabric density, Tensile strength, Pilling propensity, Abrasion resistance, Colour fastness
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric surfaces and allow to soak for 5 minutes
- Clean with a soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
Before applying any cleaning agent, including recommended agents, test in a small out of the way area | |
Fold away when not in use | |
Take care when removing covers | |
Keep out of heavy rain and/or strong winds (40km/h or higher) | |
Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage | |
Blot liquid spills and stains immediately | |
Wipe down surfaces from seam-to-seam using only a light pressure to avoid colour lifting and to prevent stains from getting embedded due to vigorous cleaning | |
Clean the entire surface area of the upholstery to avoid water rings and stains | |
Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife | |
Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials |
When putting the covers do not immediately zip up | |
Do not dry-clean, tumble-dry or wring-dry as this may cause damage | |
Don’t rub - only a light pressure | |
Don’t allow upholstery to stay wet | |
Prolonged outdoor use in extreme weather conditions is not recommended |
Powder Coated Aluminium
Why Powder Coated Aluminium? Powder Coated Aluminium is Highly durable, Lightweight, Easy to clean, Rust proof, UV, fade and weather resistant, Environmentally-friendly, Low maintenance
This product may possess physical and technical attributes that form part of the natural characteristics of this material. Such features may include, but are not limited to: Colour variation, Texture variation, Blemishes, Abrasion resistance, Colour fastness, Scent
How to clean powder coated aluminium
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
- Apply to a clean microfibre cloth and wipe down all surfaces
- Rinse off thoroughly with clean water to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 3-6 months, depending on the furniture’s level of use
How to remove hard-water stains
- Prepare a solution of equal parts white vinegar and distilled water
- Spray the solution directly on to the stain and allow to sit for 10-15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- If the scaling has only been slightly lifted, repeat steps 2 and 3 to allow the stain more time to soak
- If successful, allow to air dry completely before use, otherwise proceed to the next step
- Prepare a paste consisting of 3 parts baking soda, 1 part distilled water and a few drops of white vinegar
- Apply the paste to a clean sponge and gently scrub the stain
- Apply more paste directly on to the stain and allow to sit for 15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- Re-apply the paste for a second time if required
Before applying any cleaning agent, including recommended agents, test in a small out of the way area | |
Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining | |
Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife | |
Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials | |
When using white spirits, cleaning should be carried out in shade and during cooler temperatures using a soft cloth and gentle wiping only | |
It is recommended that prior to cleaning, a small non-visible area of the powder coated article be tested to ensure that no visual color change or damage will occur |
Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining | |
Don’t hose down your furniture during periods of extreme heat | |
Prolonged outdoor use in extreme weather conditions is not recommended | |
Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones | |
Abrasive cleaners or cutting compounds should not be used | |
Interpon Powder Coatings recommends nothing stronger than white spirits to assist with stubborn stains such as hard water spots / calcium stains |
Standard Warranty
Lavita Outdoor's Standard Warranty is subject to the product being cared for in accordance with the relevant care and maintenance guides. Materials and components that form part of your product are warranted against failure due to material and manufacturing faults, as outlined in the table below.
Coverage | Period | |
---|---|---|
Fabric | Coverage of outdoor fabric as a result of a manufacturing or material defect, except where stated in Exclusions. | 1 Years |
Aluminium Frame | Loss of structural integrity to the frame as a result of a manufacturing or material defect, except where stated in Exclusions. | 1 Years |
Hard Components | Failure of hard components including hardware, fixtures and fasteners as a result of a manufacturing or material defect, except where stated in Exclusions. | 1 Years |
Soft Components | Failure of soft components including threading and stitching as a result of a manufacturing or material defect, except where stated in Exclusions. | 1 Years |
How to Lodge A Claim
Our Customer Support Team are able to assist with any issues you may experience with your purchase. To lodge a claim, please notify Lavita Outdoor of the defect within 7 days of the defect occurring by email to [email protected].
The following details will be required when lodging a claim for assessment:
- Your order number
- A list of the product/s or component/s affected
- A description of the defect that has occurred
- Photographs showing the location of the defect on the product/s or component/s, as well as a close up photo showing the issue in detail
At times, further information may be required to accurately assess a claim. In order to expedite this process, please respond promptly to all requests made by our Customer Support Team.
Lavita Outdoor reserves the right to determine whether a part has failed due to a defect or wear and tear and whether a product or component should be repaired or replaced. Any repair or replacement under this warranty is limited to the defective part/s only.
Warranty Exclusions
Lavita Outdoor's Standard Warranty does not apply to products sold as seconds, floorstock or clearance, repaired products, or products with a defect which has been drawn to the customer’s attention before purchase. Additionally, the following warranty exclusions will apply if the product or component:
- has not been directly purchased through Lavita Outdoor
- is no longer located in Australia
- has been modified or repaired without prior authorisation
- has had tags or serial numbers removed
- has been mishandled or used inappropriately, or in a manner which may be deemed abnormal to its prescribed use
- has not been properly cared for and maintained
- has become defective or damaged due to pets
- has become defective or damaged due to spills including acid, solvent, dyes and other corrosive materials
- has become defective or damaged as a result of fading, burns, bleaching, stains or UV damage by way of sunlight, chemicals, other materials or other natural phenomena (unless stated otherwise)
- has become defective or damaged due to misuse, commercial use, improper handling or in a manner which is greater than, or exceptional to normal domestic use
Defects which arise as the result of normal wear and tear will not be covered. Any defect which has already been explained or described at the point of purchase will not be covered. Characteristics and properties of natural materials including leather, fabric, timber, stainless steel and aluminium among others are not considered to be defects, and form part of this exclusion.
This warranty is not transferable. It is limited to the original purchaser specified in the original sales order at the original delivery address.
To benefit under this warranty, the purchaser must formalise a claim with Lavita Outdoor in writing, clearly describing the issue within 7 days of the defect occurring.
Australian Consumer Rights
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please visit https://consumer.gov.au/consumers-and-acl for more information.
-
Alexandria 614-618 Botany Rd Alexandria NSW 2015
Products from this collection are available to view at our Alexandria store.
-
-
-
Casula Shop 23B Crossroads Homemaker Centre Cnr Beech Road & Camden Valley Way Casula NSW 2170
This product is not on display at our Casula store.
-
Dandenong 90 Frankston-Dandenong Rd Dandenong VIC 3175
Products from this collection are available to view at our Dandenong store.
-
Mount Waverley 27 Hardner Rd Mount Waverley VIC 3149
Products from this collection are available to view at our Mount Waverley store.
-