Care Instructions

Benefits

• Highly durable
• Lightweight
• Easy to clean
• Rust proof
• UV, fade and weather resistant
• Environmentally-friendly
• Low maintenance

Natural Characteristics

• Colour & texture variation – Slight variations in colour, sheen, and texture may occur between different batches
• Minor surface blemishes – Small imperfections may be present due to the powder-coating process
• Abrasion resistance – While durable, minor scratches and scuff marks may develop over time
• Colour fastness – UV exposure may result in gradual fading, which is not considered a defect
• Scent – A mild odour may be present due to coating and curing processes

How to Clean

How to clean powder coated aluminium

1. Remove all objects and items before cleaning
2. Wipe away any light dust and particles with a dry microfiber cloth
3. Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
4. Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
5. Apply to a clean microfibre cloth and wipe down all surfaces
6. Rinse off thoroughly with clean water to remove any excess detergent
7. Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
8. Repeat the cleaning process every 3-6 months, depending on the furniture’s level of use

How to remove hard-water stains

1. Prepare a solution of equal parts white vinegar and distilled water
2. Spray the solution directly on to the stain and allow to sit for 10-15 minutes
3. Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
4. If the scaling has only been slightly lifted, repeat steps 2 and 3 to allow the stain more time to soak
5. If successful, allow to air dry completely before use, otherwise proceed to the next step
6. Prepare a paste consisting of 3 parts baking soda, 1 part distilled water and a few drops of white vinegar
7. Apply the paste to a clean sponge and gently scrub the stain
8. Apply more paste directly on to the stain and allow to sit for 15 minutes
9. Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
10. Re-apply the paste for a second time if required

Do's

• Before applying any cleaning agent, including recommended agents, test in a small out of the way area
• Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
• Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
• Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
• When using white spirits, cleaning should be carried out in shade and during cooler temperatures using a soft cloth and gentle wiping only
• It is recommended that prior to cleaning, a small non-visible area of the powder coated article be tested to ensure that no visual color change or damage will occur

Don'ts

• Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
• Don’t hose down your furniture during periods of extreme heat

• Prolonged outdoor use in extreme weather conditions is not recommended
• Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones
• Abrasive cleaners or cutting compounds should not be used
• Interpon Powder Coatings recommends nothing stronger than white spirits to assist with stubborn stains such as hard water spots / calcium stains