Care Instructions
Find your product for its specific care guide, or browse our material care guides below.
Guardsman Outdoor Care Collection ×
View warranty for this product
No specific care guide was found for this item. Browse our material care guides below.
Benefits
- Highly durable
- Easy to clean
- UV, fade and weather resistant
- Mold and mildew resistant
- Bleach cleanable
Natural Characteristics
- Colour variation
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
- Scent
Don'ts
- Avoid placing furniture in environments that may cause UV damage when magnified by surfaces such as glass (including glass balustrades, glass panels)
- Don’t rub - instead, wipe down surfaces from seam-to-seam using only a light pressure
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
How to Clean
How to clean Acrylic outdoor fabric
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric surfaces and clean with a microfibre cloth or soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
How to clean mold & Mildew from Acrylic outdoor fabric
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Prepare a solution of 1 cup of bleach and one fourth cup mild soap per 4 litres of water
- Spray on entire area and allow to soak into the fabric for 15 minutes
- Clean entire surface area with a sponge, clean towel or very soft bristle brush
- Rinse thoroughly to remove all soap residue
- Allow to air dry completely before use
How to clean oil-based stains from Acrylic outdoor fabric
- Immediately apply an absorbent such as corn starch directly on the oil-based stain
- Allow to sit for 10 minutes
- Remove the excess using a straight edge or ruler - this helps remove the stain and prevents it from being pressed into the fabric
- Proceed with the regular cleaning process as described above
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Avoid placing right next to glass fences and/or large bodies of water due to possible magnified sunlight
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Keep cushions out of heavy rain
- Clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Benefits
- Highly durable
- Increased longevity
- Lightweight
- Easy to clean
- Low maintenance
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a damp cloth
- Spray all anodised aluminium surfaces with a high pressure hose
- Prepare a mild cleaning solution consisting of one or two drops of ph-neutral soap with 1 litre of water
- Apply to a mildly abrasive cloth and wipe down all anodised aluminium surfaces, scrubbing thoroughly
- Rinse off thoroughly with clean water to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 2-4 months, depending on the furniture’s level of use
Natural Characteristics
- Colour & texture variation – Anodisation can produce slight variations in finish
- Surface blemishes – Minor markings and textural inconsistencies may occur due to the manufacturing process
- Hard water staining – Exposure to minerals and environmental conditions can result in surface spots or build-up
- Patina formation – Over time, anodised aluminium may develop a natural patina, which does not affect performance
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Anodised aluminium requires a mildly abrasive touch and only a mild cleaning solution for general upkeep
Don'ts
- Don’t hose down your furniture during periods of extreme heat; sudden temperature changes may cause stress on a material which can weaken it long-term
- Prolonged outdoor use in extreme weather conditions is not recommended
- Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones
- Abrasive cleaners or cutting compounds should not be used
Benefits
- Highly durable
- Easy to clean
- UV, fade and weather resistant
- Mold and mildew resistant
Natural Characteristics
- Colour & texture variation – Variations in dye lots can result in slight colour differences
- Fabric density & tensile strength – Material stretch and compression are normal over time
- Pilling propensity – Some fabrics may experience minor pilling, which is a natural occurrence in woven textiles
- Abrasion resistance – Friction from use may result in gradual wear patterns
- Colour fastness – Prolonged UV exposure may cause fading or slight colour shifts over time
- Static electricity – Certain fabrics may generate static build-up, particularly in dry environments
- Scent – Some materials may retain a slight manufacturing scent, which dissipates with time
How to Clean
How to clean Axroma® outdoor fabric
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all Axroma® fabric surfaces and clean with a microfibre cloth or soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
How to clean mold & mildew from Axroma® outdoor fabric
- Prepare a solution of 1 cup of bleach and one fourth cup mild soap per 4 litres of water
- Spray on entire area and allow to soak into the fabric for 15 minutes
- Clean entire surface area with a sponge, clean towel or very soft bristle brush
- Rinse thoroughly to remove all soap residue
- Allow to air dry completely before use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately with a clean
- wipe down surfaces from seam-to-seam using only a light pressure
- Clean the entire surface area of the upholstery to avoid water rings and stains
- keep cushions out of heavy rain
- clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Prolonged outdoor use in extreme weather conditions is not recommended
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t rub to clean
- Don’t allow upholstery to stay wet
- Don't leave cushions out in wet weather
- Don't use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Increased longevity
- Lightweight
- Easy to clean
- Low maintenance
Natural Characteristics
- Colour variation
- Texture variation
- Blemishes
- Abrasion resistance
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a damp cloth
- Spray all anodised aluminium surfaces with a high pressure hose
- Prepare a mild cleaning solution consisting of one or two drops of ph-neutral soap with 1 litre of water
- Apply to a mildly abrasive cloth and wipe down all anodised aluminium surfaces, scrubbing thoroughly
- Rinse off thoroughly with clean water to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 2-4 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Anodised aluminium requires a mildly abrasive touch and only a mild cleaning solution for general upkeep
Don'ts
- Don’t hose down your furniture during periods of extreme heat; sudden temperature changes may cause stress on a material which can weaken it long-term
- Prolonged outdoor use in extreme weather conditions is not recommended
- Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones
- Abrasive cleaners or cutting compounds should not be used
Benefits
- Highly durable
- Easy to clean
- Environmentally-friendly
- Low maintenance
Natural Characteristics
- Colour & shade variation – Ceramic surfaces may exhibit minor variations in tone and grain patterns
- Brittleness – While durable, ceramic surfaces can chip or crack if subjected to force
- Abrasion resistance – Minor surface marks or scuffs may develop over time
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water and spray onto the entire surface
- Wipe down thoroughly with a clean, dry microfiber cloth - moving in one direction only
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Don’t drop hard or heavy items on to the surface; this may cause damage, even when dropped from a short distance
- always use a chopping board when cutting food items as a knife can cause damage to the surface
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t hose down furniture during periods of extreme heat
- sudden temperature changes may cause stress on a material which can weaken it long-term
- Don’t drop hard or heavy items on to the surface; this may cause damage, even when dropped from a short distance
- Don’t use your tabletop as a food preparation surface;
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Easy to clean
- UV and weather resistant
Natural Characteristics
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
- Scent
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a soft-bristled brush or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector to all CITEL® upholstered surfaces and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all CITEL® fabric surfaces and clean with a microfibre cloth or soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Clean the entire surface area of the upholstery to avoid water rings and stains
- remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t rub - instead, wipe down surfaces from seam-to-seam using only a light pressure
- Don’t allow upholstery to stay wet
- Don't leave cushions out in heavy rain
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Lightweight
- Easy to clean
- Traditional styling to suit most spaces
Natural Characteristics
- Grain & colour variation – Each piece of timber has a unique grain and shade variation
- Texture inconsistencies – Knots, mineral streaks, and other markings are normal characteristics of natural wood
- Expansion & contraction – Wood may expand or contract slightly due to temperature and humidity
- Patina & weathering – Outdoor exposure may result in natural silvering or changes in tone
- Surface imperfections – Small cracks or checking may appear over time but do not affect structural integrity
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Apply a hardwood cleaner such as Goldencare or Guardsman Teak & Hardwood Cleaner and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water and spray onto the surface, paying special attention to sticky marks or stubborn spots
- Wipe down thoroughly with a clean, dry microfiber cloth or soft-bristled brush
- Apply a hardwood polish or wax with a quality oil such as Guardsman Teak & Hardwood Protector
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
Do's
- We reccommend using Goldencare Teak Cleaner, Protector and TeakShied OR Guardsman Wood Care Collection for all timber furniture
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt and dust, which may lead to damage
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Always use a chopping board when cutting food items as a knife can cause damage to the surface
- Cover furniture when not in use to prevent mold or damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Regular polishing and waxing with a quality oil is recommended to assist in the protection and enhancement of wooden furniture
Don'ts
- Don’t use your tabletop as a food preparation surface
- Prolonged outdoor use in extreme weather conditions is not recommended
- Do not use a polypropylene based cleaner
Benefits
- More variety by way of colour, pattern and weave
- Smooth to the touch with a soft hand
- Easily styled to suit most spaces
- A cost-effective solution to leather
Natural Characteristics
- Colour variation
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
- Static electricity
- Scent
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply a small amount of fabric care cleaner such as Guardsman Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric upholstery surfaces and clean with a microfibre cloth, using only a light pressure and moving in one direction only
- Use a clean towel to remove any excess solution and allow the furniture to dry naturally before use
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
Tips
- Weekly vacuuming is recommended, using a soft-brush attachment and low suction
- Blot liquid spills and stains immediately with a clean, dry cloth or paper towel, working from the outside of the stain to the inside using only just enough pressure to remove the substance
- Don’t rub - instead, wipe down surfaces from seam-to-seam using only a light pressure to avoid pilling, colour lifting and to prevent stains from getting embedded due to vigorous cleaning
- Clean the entire surface area where applicable to avoid staining and water rings
- Don’t allow upholstery to stay wet - clean spills immediately using the correct cleaning method and remove excess moisture
- Always allow upholstered furniture to air-dry completely before use
- Do not use a hair dryer or heater to dry upholstered furniture
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Weekly vacuuming is recommended, using a soft-brush attachment and low suction
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure
- Clean the entire surface area where applicable to avoid staining and water rings
- Clean spills immediately using the correct cleaning method and remove excess moisture
- Always allow upholstered furniture to air-dry completely before use
- Do not use a hair dryer or heater to dry upholstered furniture
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
Don'ts
- Don’t rub to vigorous clean
- Don't Scrub to clean
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstered furniture
Benefits
- Highly durable
- Easy to clean
- Tempered safety glass
- Luxurious finish
How to Clean
How to clean frosted glass
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth from both sides of the glass
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Use an ammonia-based product and spray onto the entire glass surface
- Wipe down thoroughly with a clean, dry microfiber cloth or newspaper - moving in one direction only
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
How to clean oil based stains from frosted glass
- Mix 1 tablespoon of detergent such as Fairy Liquid Detergent and 1 tablespoon of baking soda with 2 cups of boiling water
- Apply to the stained area and allow to sit for a few minutes
- Wipe down in one direction only with a clean microfibre cloth
- Remove excess water and white streaks with a paper towel, dampened with a little lemon juice, in one direction only
Natural Characteristics
- Colour & optical variations – Small waves, bubbles, or distortions may be visible due to the tempering process
- Abrasion & scratches – While highly durable, glass surfaces are not scratch-proof
- Thermal stress – Extreme temperature fluctuations may affect the glass's performance
- Edge variations – Edges may have slight inconsistencies due to cutting and polishing
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Tempered glass has been hardened to resist breakage In the event of breakage, caution should always be exercised
- Avoid prolonged exposure to direct sunlight
- Use table cloth or other shade options to protect from direct sun for prolonged time
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Always use a chopping board when cutting food items as a knife can cause damage to the surface
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Wipe down regularly to avoid excessive build up of corrosive materials
- Avoid placing right next to glass fences and/or large bodies of water due to possible magnified sunlight
- Keep glass dry on sunny days to minimise temperature variation in surface
Don'ts
- By no means should it be considered unbreakable or scratch-proof
- Don’t hose down furniture during periods of extreme heat
- Don’t leave oil-based items on frosted glass surfaces
- Don’t drop hard or heavy items on to the surface
- Don’t use your tabletop as a food preparation surface
- Don’t apply glass cleaner to painted or frosted glass
- Prolonged outdoor exposure in extreme weather conditions is not recommended
- Avoid placing furniture in environments that may cause UV damage when magnified by surfaces such as glass (including glass balustrades, glass panels)
Benefits
0
How to Clean
0
Benefits
- Natural stone with unique veining and patterns, contributing to an elegant and sophisticated appearance, enhancing the overall aesthetic of the space.
- Can complement various interior styles, from classic to contemporary, due to their timeless appeal.
- While softer than some stones, marble is still durable and can withstand regular use when properly maintained.
- Relatively easy to clean
- Long lifespan when properly cared for.
Natural Characteristics
- Colour variation
- Pattern variation
- Unique Markings
- Blemishes
- Brittleness
How to Clean
- Periodically clean with a damp cloth. A small amount of gentle dishwashing solutions may be used if necessary.
- Refrain from using harsh cleaners or abrasive chemicals.
- Protect the surface from acidic spills such as wine, coffee, juice, tomato sauce etc.
- Spills should be immediately cleaned with a gentle cloth.
- Avoid placing heavy or sharp objects on the surface of the marble/travertine as it can be prone to nicks, scratches, and stains.
- When moving your furntiure, excercise caution. Never drag or push the marble/travertine furniture as it can cause crack and chip.
Do's
- Use protective heat coverings to protect against hot objects. A tablecloth is not sufficient.
- Use coasters when placing glasses, bottles or cups on the surface.
- Any liquid spills should be wiped clean immediately.
- Remove dirt and dust by wiping with a warm, damp cloth.
Don'ts
- Avoid any type of acidic or abrasive cleaner, such as bleach, vinegar and harsh scrubbing pads. Acidic substances can corrode the marble surface and leave the stone looking dull.
- Avoid placing and dragging heavy or sharp objects on the table top as it is a porous stone by nature and can be prone to nicks, scratches, and stains.
- Avoid dragging or pushing the Marble/Travertine furniture.
Benefits
- Easy to clean
- Machine washable
- Extremely durable
- Eco-Friendly
- UV, fade and weather resistant
Natural Characteristics
- Colour variation
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric surfaces and allow to soak for 5 minutes
- Clean with a soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- For machine washable cushion covers: remove covers carefully (see ADDITIONAL TIPS below) and place in a cold-water, gentle cycle with regular washing detergent
- Once machine-washed, allow the cushion covers to dry naturally before attempting to put the covers back on
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- To remove fabric covers, unzip the cover fully, fold the cushion in half to allow the opening some slack and gently pull out
- Take care when removing cushion covers
- A quick solution of jammed zipper is WD-40 sprayed onto a cotton bud, simply apply to the teeth of the zipper, paying special attention to the zipper tab
- Turn covers inside out to protect the zippers while cleaning
- When putting the covers back on (once dry), leave them unzipped, take a seat and allow the foam some time to work it’s way back into the cover before zipping up
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure to avoid colour lifting and to prevent stains from getting embedded due to vigorous cleaning
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Keep cushions out of heavy rain, clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Avoid placing right next to glass fences and/or large bodies of water due to possible magnified sunlight
Don'ts
- Zippers are fragile and force should never be used when opening
- When putting the covers do not immediately zip up
- Do not dry-clean, tumble-dry or wring-dry cushion covers or foam as this may cause damage
- Don’t rub - only a light pressure
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Water resistant
- Easy to clean
- Machine washable
Natural Characteristics
- Colour variation
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric surfaces and allow to soak for 5 minutes
- Clean with a soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- For machine washable cushion covers: remove covers carefully (see ADDITIONAL TIPS below) and place in a cold-water, gentle cycle with regular washing detergent
- Once machine-washed, allow the cushion covers to dry naturally before attempting to put the covers back on
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- To remove fabric covers, unzip the cover fully, fold the cushion in half to allow the opening some slack and gently pull out
- Take care when removing cushion covers
- A quick solution of jammed zipper is WD-40 sprayed onto a cotton bud, simply apply to the teeth of the zipper, paying special attention to the zipper tab
- Turn covers inside out to protect the zippers while cleaning
- When putting the covers back on (once dry), leave them unzipped, take a seat and allow the foam some time to work it’s way back into the cover before zipping up
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure to avoid colour lifting and to prevent stains from getting embedded due to vigorous cleaning
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Keep cushions out of heavy rain, clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Zippers are fragile and force should never be used when opening
- Do not remove the Dacron mesh lining from the foam
- Zippers may catch on to the Dacron lining, resulting in a jammed zipper
- When putting the covers do not immediately zip up
- Do not dry-clean, tumble-dry or wring-dry cushion covers or foam as this may cause damage
- Don’t rub - only a light pressure
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Lightweight
- Easy to clean
- UV, fade and water resistant
- Environmentally-friendly
- Low maintenance
Natural Characteristics
- Colour & texture variation – Synthetic wicker may have subtle variations in texture and weave
- Abrasion & surface wear – Prolonged use may result in minor fraying or scuffing
- UV exposure – Over time, slight fading or discolouration may occur in extreme conditions
How to Clean
- Remove all cushions and coverings before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Gently wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
- Apply to a clean microfibre cloth and wipe down all surfaces
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t hose down furniture during periods of extreme heat
- Sudden temperature changes may cause stress on a material which can weaken it long-term
- Prolonged outdoor use in extreme weather conditions is not recommended
-
Benefits
- Highly Durable
- Lightweight
- Highly Comfortable
- Breathability
- Easy Care
Natural Characteristics
- Lightweight
- Strong and Durable - high resistance to wear and tear, making it a long-lasting filling material for cushions and furniture.
- Resistant to Moisture - Polypropylene fibre does not absorb water, making it resistant to mildew, mold, and bacteria growth.
- Flexible - can mold to the contours of the body, providing comfort and support.
- Breathability -allows air to pass hrough, which helps regulate temperature and provides a cooler, more comfortable seating experience.
How to Clean
- Vacuum Regularly:Use a vacuum with an upholstery attachment to remove dust, dirt, and debris from the cushion surface.
- Spot Clean Stains :Use Mild detergent with warm water. Avoid soaking the cushion
- Handling Water: The cushion is water-repellent and may create small puddles when exposed to rain. Important: Manually pour out any pooled water as soon as possible to prevent prolonged exposure, which could affect the cushion’s longevity.
- Rinse Lightly: After spot cleaning, wipe the area with a clean, damp cloth to remove any soap residue.
- Fluff Regularly: To maintain the cushion's shape and resilience, fluff it occasionally by gently massaging the filling to redistribute the fibres.
- Dry Properly: Allow the cushion to air dry in a well-ventilated area, turning often, preferably in the shade to avoid UV damage.
Do's
- Vacuum regularly to remove dust and dirt.
- Spot clean stains with mild detergent and water.
- Pour out pooled water promptly after rain.
- Air dry in a well-ventilated, shaded area.
- Fluff the cushion to maintain shape.
Don'ts
- Don’t Soak the Cushion.
- Don’t Machine Dry.
- Don’t Leave Water on the Cushion.
- Don’t Use Sharp Objects.
Benefits
- Protective finish
- Durable
- Easy to clean
- Low maintenance
Natural Characteristics
- Colour & texture variation – Differences in batch production may result in slight colour or texture variations
- Surface blemishes – Small imperfections may be present due to moulding and finishing processes
- Abrasion & wear resistance – While highly durable, PU surfaces may develop fine scratches or scuffs over time
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water and spray onto the entire surface
- Wipe down thoroughly with a clean, dry microfiber cloth - moving in one direction only
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 2-4 weeks, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt and dust, which may lead to damage
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Always use a chopping board when cutting food items as a knife can cause damage to the surface
Don'ts
- Don’t use your tabletop as a food preparation surface
- Dont place hot cups or pans direct on the surface
- Dont leave glasses on the surface in hot sun as it will act as 'magnifying glass' damaging the material.
Benefits
- Highly durable
- Lightweight
- Easy to clean
- Rust proof
- UV, fade and weather resistant
- Environmentally-friendly
- Low maintenance
Natural Characteristics
- Colour & texture variation – Slight variations in colour, sheen, and texture may occur between different batches
- Minor surface blemishes – Small imperfections may be present due to the powder-coating process
- Abrasion resistance – While durable, minor scratches and scuff marks may develop over time
- Colour fastness – UV exposure may result in gradual fading, which is not considered a defect
- Scent – A mild odour may be present due to coating and curing processes
How to Clean
How to clean powder coated aluminium
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
- Apply to a clean microfibre cloth and wipe down all surfaces
- Rinse off thoroughly with clean water to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 3-6 months, depending on the furniture’s level of use
How to remove hard-water stains
- Prepare a solution of equal parts white vinegar and distilled water
- Spray the solution directly on to the stain and allow to sit for 10-15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- If the scaling has only been slightly lifted, repeat steps 2 and 3 to allow the stain more time to soak
- If successful, allow to air dry completely before use, otherwise proceed to the next step
- Prepare a paste consisting of 3 parts baking soda, 1 part distilled water and a few drops of white vinegar
- Apply the paste to a clean sponge and gently scrub the stain
- Apply more paste directly on to the stain and allow to sit for 15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- Re-apply the paste for a second time if required
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- When using white spirits, cleaning should be carried out in shade and during cooler temperatures using a soft cloth and gentle wiping only
- It is recommended that prior to cleaning, a small non-visible area of the powder coated article be tested to ensure that no visual color change or damage will occur
Don'ts
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
- Don’t hose down your furniture during periods of extreme heat
- Prolonged outdoor use in extreme weather conditions is not recommended
- Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones
- Abrasive cleaners or cutting compounds should not be used
- Interpon Powder Coatings recommends nothing stronger than white spirits to assist with stubborn stains such as hard water spots / calcium stains
Benefits
- Highly durable
- Easy to clean
- UV and weather resistant
- Environmentally-friendly
Natural Characteristics
- Grain & colour variation – Stainless steel may have minor differences in grain patterns
- Surface blemishes & teastaining – Prolonged exposure to salt air may result in teastaining (surface rusting), which can be cleaned
- Abrasion & scratching – While highly durable, scuffs and scratches may occur over time
How to Clean
How to clean Stainless Steel
- Remove all cushions and coverings before cleaning
- Remove any loose dirt and particles with a dry cloth
- Gently wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
- Apply to a clean microfibre cloth and wipe down all surfaces
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent
- Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
- Repeat the cleaning process every 3-4 months, depending on the furniture’s level of use
How to remove Hard-Water Stains
- Prepare a solution of equal parts white vinegar and distilled water
- Spray the solution directly on to the stain and allow to sit for 10-15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- If the scaling has only been slightly lifted, repeat steps 2 and 3 to allow the stain more time to soak
- If successful, allow to air dry completely before use, otherwise proceed to the next step
- Prepare a paste consisting of 3 parts baking soda, 1 part distilled water and a few drops of white vinegar
- Apply the paste to a clean sponge and gently scrub the stain
- Apply more paste directly on to the stain and allow to sit for 15 minutes
- Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
- Re-apply the paste for a second time if required
How to remove Tea Staining
- Treat the surface to dissolve the stain by using a phosphoric acid mixture, but avoid using a mixtures containing hypochlorite, hydrochloric acid or chlorine
- Wet the surface with the solution, at the recommended dilution using a rag or soft-bristled brush
- Leave the solution on the surface until the stain has been removed - about 30 minutes or longer, ensuring the surface is never dried out
- It often helps to renew the application during this time - mild rubbing with the applicator may help to dislodge heavier deposits
- If required, gel or paste formulations are available to help the acid stay on the surface, particularly when on steep & vertical surfaces
- Alternatively, a sulphamic acid based powder cleaner (e.g. Essteele Stainless Steel Cleaner) on a moist rag can be used. The stains can be scrubbed off – once over to leave some chemical on the surface, then a second scrub after five or ten minutes is usually effective.
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage such as teastaining
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t hose down furniture during periods of extreme heat
- Sudden temperature changes may cause stress on a material which can weaken it long-term
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Easy to clean
- UV, fade and weather resistant
- Mold and mildew resistant
- Bleach cleanable
Natural Characteristics
- Colour & texture variation – Variations in dye lots can result in slight colour differences
- Fabric density & tensile strength – Material stretch and compression are normal over time
- Pilling propensity – Some fabrics may experience minor pilling, which is a natural occurrence in woven textiles
- Abrasion resistance – Friction from use may result in gradual wear patterns
- Colour fastness – Prolonged UV exposure may cause fading or slight colour shifts over time
- Static electricity – Certain fabrics may generate static build-up, particularly in dry environments
- Scent – Some materials may retain a slight manufacturing scent, which dissipates with time
How to Clean
How to clean Sunbrella® outdoor fabric
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all Sunbrella® fabric surfaces and clean with a microfibre cloth or soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
How to clean mold & Mildew from Sunbrella® outdoor fabric
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Prepare a solution of 1 cup of bleach and one fourth cup mild soap per 4 litres of water
- Spray on entire area and allow to soak into the fabric for 15 minutes
- Clean entire surface area with a sponge, clean towel or very soft bristle brush
- Rinse thoroughly to remove all soap residue
- Allow to air dry completely before use
How to clean oil-based stains from Sunbrealla® outdoor fabric
- Immediately apply an absorbent such as corn starch directly on the oil-based stain
- Allow to sit for 10 minutes
- Remove the excess using a straight edge or ruler - this helps remove the stain and prevents it from being pressed into the fabric
- Proceed with the regular cleaning process as described above
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Avoid placing right next to glass fences and/or large bodies of water due to possible magnified sunlight
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Keep cushions out of heavy rain
- Clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Avoid placing furniture in environments that may cause UV damage when magnified by surfaces such as glass (including glass balustrades, glass panels)
- Don’t rub - instead, wipe down surfaces from seam-to-seam using only a light pressure
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Low maintenance compared to other types of wood
- Aesthetic appeal
- Comfortable to touch even on hot days
- Decay resistant
- Harvested from sustainably managed plantations
Natural Characteristics
- Grain & colour variation – Each piece of timber has a unique grain and shade variation
- Texture inconsistencies – Knots, mineral streaks, and other markings are normal characteristics of natural wood
- Expansion & contraction – Wood may expand or contract slightly due to temperature and humidity
- Patina & weathering – Outdoor exposure may result in natural silvering or changes in tone
- Surface imperfections – Small cracks or checking may appear over time but do not affect structural integrity
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth
- Apply a hardwood cleaner such as Goldencare or Guardsman Teak & Hardwood Cleaner and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water and spray onto the surface, paying special attention to sticky marks or stubborn spots
- Wipe down thoroughly with a clean, dry microfiber cloth or soft-bristled brush
- Wipe down the teak furniture periodically with a clean, dry cloth to remove excess oil residue and prevent it from accumulating.
- Ensure adequate ventilation around the teak furniture to promote airflow and allow any released oils to dissipate more quickly.
- Apply a hardwood polish or wax with a quality oil such as Guardsman Teak & Hardwood Protector
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
- Stains caused by teak oil on fabric can be remedied with either soap and water or a specialized eucalyptus-based cleaner.
Do's
- We reccommend using Goldencare Teak Cleaner, Protector and TeakShied OR Guardsman Care products for all teak, eucalyptus and timber furniture
- Place a barrier between the teak furniture and nearby surfaces, such as using a protective layer or fabric cover to prevent direct contact and potential staining.
- Ensure adequate ventilation around the teak furniture to promote airflow and allow any released oils to dissipate more quickly.
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt and dust, which may lead to damage
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Always use a chopping board when cutting food items as a knife can cause damage to the surface
- Cover furniture when not in use to prevent mold or damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Regular maintenance is recommended to assist in the protection and enhancement of wooden furniture.
Don'ts
- Do not use your tabletop as a food preparation surface
- Prolonged outdoor use in extreme weather conditions is not recommended
- Do not use a polypropylene based cleaner
- The use of varnish and oil (especially linseed oil) on teak furniture is NOT recommended.
Benefits
- Highly durable
- Easy to clean
- Safety glass
- Low maintenance
Natural Characteristics
- Colour & optical variations – Small waves, bubbles, or distortions may be visible due to the tempering process
- Abrasion & scratches – While highly durable, glass surfaces are not scratch-proof
- Thermal stress – Extreme temperature fluctuations may affect the glass's performance
- Edge variations – Edges may have slight inconsistencies due to cutting and polishing
How to Clean
- Remove all objects and items before cleaning
- Wipe away any light dust and particles with a dry microfiber cloth from both sides of the glass
- Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
- Prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water and spray onto the entire glass surface
- Wipe down thoroughly with a clean, dry microfiber cloth or newspaper - moving in one direction only
- Repeat the previous step with an additional clean, dry microfiber cloth until all excess liquid has been wiped dry
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Tempered glass has been hardened to resist breakage In the event of breakage, caution should always be exercised
- Avoid prolonged exposure to direct sunlight
- Use table cloth or other shade options to protect from direct sun for prolonged time
- In the event of breakage, tempered glass will shatter into small cubes rather than large jagged sheets to minimise the risk of injury
- Use coasters, placemats and heat mats as appropriate to increase longevity
- Always use a chopping board when cutting food items as a knife can cause damage to the surface
- Keep glass dry on sunny days to minimise temperature variation in surface
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
- Wipe down regularly to avoid excessive build up of corrosive materials
- Avoid placing right next to glass fences and/or large bodies of water due to possible magnified sunlight
Don'ts
- By no means should it be considered unbreakable or scratch-proof
- Don’t hose down furniture during periods of extreme heat
- Sudden temperature changes may cause stress on a material which can weaken it long-term
- Don’t place or drop hard or heavy items on to the surface; this may stress the glass, even when dropped from a short distance
- Don’t use your tabletop as a food preparation surface
- Don’t apply glass cleaner to painted or frosted glass; this can cause peeling or discolouration
- Don’t allow pools of water to sit on the glass in sunlight; this creates a lens effect which may cause “hot spots”
- Prolonged outdoor exposure in extreme weather conditions is not recommended
- Avoid placing furniture in environments that may cause UV damage when magnified by surfaces such as glass (including glass balustrades, glass panels)
Benefits
- Highly durable
- Easy to clean
- UV, fade and water resistant
- Anti-pilling
- Low maintenance
Natural Characteristics
- Colour & texture variation – Variations in dye lots can result in slight colour differences
- Fabric density & tensile strength – Material stretch and compression are normal over time
- Pilling propensity – Some fabrics may experience minor pilling, which is a natural occurrence in woven textiles
- Abrasion resistance – Friction from use may result in gradual wear patterns
- Colour fastness – Prolonged UV exposure may cause fading or slight colour shifts over time
- Static electricity – Certain fabrics may generate static build-up, particularly in dry environments
- Scent – Some materials may retain a slight manufacturing scent, which dissipates with time
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a soft-bristled brush or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector to all Texteline upholstered surfaces and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all Texteline fabric surfaces and clean with a microfibre cloth or soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
- Repeat the cleaning process every 1-2 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately with a clean, dry cloth or paper towel, working from the outside of the stain to the inside using only just enough pressure to remove the substance
- Wipe down surfaces from seam-to-seam using only a light pressure
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Keep cushions out of heavy rain
- clean spills immediately using the correct cleaning method and remove excess moisture
- Prop wet cushions on their sides to allow easy and efficient drainage
- Always allow outdoor furniture to air-dry completely before use
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- Don’t rub - instead, wipe down surfaces from seam-to-seam using only a light pressure
- Don’t allow upholstery to stay wet
- Do not use a hair dryer or heater to dry upholstery
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Natural stone with unique features and earthy colours, contributing to an elegant and sophisticated appearance, enhancing the overall aesthetic of the space.
- Can complement various interior styles, from classic to contemporary, due to their timeless appeal.
- While not as hard as some other stones, travertine is durable enough for furniture, with proper care ensuring it withstands regular use over time.
- Travertine develops a patina over time, giving it a weathered and aged appearance that some homeowners find charming.
- As a natural material, travertine is environmentally friendly, and its extraction and production have a lower environmental impact compared to some synthetic materials.
Natural Characteristics
- Colour variation
- Pattern variation
- Unique Markings
- Blemishes
- Brittleness
How to Clean
- Periodically clean with a damp cloth. A small amount of gentle dishwashing solutions may be used if necessary.
- Natural pitting in travertine can accumulate fine particles; dust often or use a handheld vacuum or a soft-bristled brush with water and mild soap.
- Refrain from using harsh cleaners or abrasive chemicals.
- Protect the surface from acidic spills such as wine, coffee, juice, tomato sauce etc.
- Spills should be immediately cleaned with a gentle cloth.
- Avoid placing heavy or sharp objects on the surface of the marble/travertine as it can be prone to nicks, scratches, and stains.
- When moving your furntiure, excercise caution. Never drag or push the marble/travertine furniture as it can cause crack and chip.
Do's
- Use heat-resistant covers to protect against hot objects; relying on a tablecloth alone is inadequate.
- Use coasters when placing glasses, bottles or cups on the surface.
- Any liquid spills should be wiped clean immediately.
- Remove dirt and dust by wiping with a warm, damp cloth.
Don'ts
- Avoid any type of acidic or abrasive cleaner, such as bleach, vinegar and harsh scrubbing pads. Acidic substances can corrode the Travertine surface and leave the stone looking dull.
- Avoid placing and dragging heavy or sharp objects on the table top as it is a porous stone by nature and can be prone to nicks, scratches, and stains.
- Avoid dragging or pushing the Travertine furniture.
Benefits
- Water resistant
- Easy to clean
Natural Characteristics
- Colour variation
- Texture variation
- Fabric density
- Tensile strength
- Pilling propensity
- Abrasion resistance
- Colour fastness
How to Clean
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply an outdoor fabric cleaning solution such as Guardsman Weather Defence Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric surfaces and allow to soak for 5 minutes
- Clean with a soft-bristled brush, moving in one direction only
- Rinse off thoroughly with a clean, wet cloth to remove any excess detergent and allow to dry naturally
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Fold away when not in use
- Take care when removing covers
- Keep out of heavy rain and/or strong winds (40km/h or higher)
- Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to damage
- Blot liquid spills and stains immediately
- Wipe down surfaces from seam-to-seam using only a light pressure to avoid colour lifting and to prevent stains from getting embedded due to vigorous cleaning
- Clean the entire surface area of the upholstery to avoid water rings and stains
- Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
- Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
Don'ts
- When putting the covers do not immediately zip up
- Do not dry-clean, tumble-dry or wring-dry as this may cause damage
- Don’t rub - only a light pressure
- Don’t allow upholstery to stay wet
- Prolonged outdoor use in extreme weather conditions is not recommended
Benefits
- Highly durable
- Easy to clean
- More variety by way of colour, pattern and weave
- Smooth to the touch with a soft hand
- Easily styled to suit most spaces
- A cost-effective alternative to leather
Natural Characteristics
- Colour & texture variation – Variations in dye lots can result in slight colour differences
- Fabric density & tensile strength – Material stretch and compression are normal over time
- Pilling propensity – Some fabrics may experience minor pilling, which is a natural occurrence in woven textiles
- Abrasion resistance – Friction from use may result in gradual wear patterns
- Colour fastness – Prolonged UV exposure may cause fading or slight colour shifts over time
- Static electricity – Certain fabrics may generate static build-up, particularly in dry environments
- Scent – Some materials may retain a slight manufacturing scent, which dissipates with time
How to Clean
- Remove all throws and accessories before cleaning
- Remove any loose dirt and particles with a dry cloth or soft vacuum attachment
- Apply a small amount of fabric care cleaner such as Guardsman Fabric Protector and use as directed
- Alternatively, prepare a mild cleaning solution consisting of approximately 2 teaspoons of ph-neutral soap with 1 litre of water
- Spray the solution on all fabric upholstery surfaces and clean with a microfibre cloth, using only a light pressure and moving in one direction only
- Use a clean towel to remove any excess solution and allow the furniture to dry naturally before use
- Repeat the cleaning process every 2-3 months, depending on the furniture’s level of use
Do's
- Before applying any cleaning agent, including recommended agents, test in a small out of the way area
- Weekly vacuuming is recommended, using a soft-brush attachment and low suction
- Blot liquid spills and stains immediately with a clean, dry cloth or paper towel, working from the outside of the stain to the inside using only just enough pressure to remove the substance
- Clean the entire surface area where applicable to avoid staining and water rings
- Clean spills immediately using the correct cleaning method and remove excess moisture
- Always allow upholstered furniture to air-dry completely before use
- Where applicable, fluff and rotate cushions regularly to maintain shape and increase longevity
- Visit Warwick Fabrics for detailed information on proper stain removal of certain substances and additional cleaning advice
Don'ts
- Don’t rub to vigorous clean
- Don’t allow upholstery to stay wet - clean spills immediately using the correct cleaning method and remove excess moisture
- Do not use a hair dryer or heater to dry upholstered furniture
-
Voucher
Delivery location
We use this to show delivery options and your nearest store.
Australia only
Select one to continue.
Pick a suburb from the list so we know exactly where to deliver.
Choose your store
✓
Saved.
Delivering to from .
Finding nearby stores…
Sorry — we don't deliver to yet.
You can still browse and order for pickup at our closest store, or join the waitlist for delivery to your area.
Couldn't load stores.
Check your connection and try again.
